Home / Indoor LED
Indoor LED
Indoor LED panels trade brightness for pixel density. Without sunlight to fight, the design budget goes into finer pitch, better colour at low drive levels and lighter cabinets that are...
Filters
Sort Most relevant
No products found.
Try using fewer filters, or clear all filters.
Indoor LED panels trade brightness for pixel density. Without sunlight to fight, the design budget goes into finer pitch, better colour at low drive levels and lighter cabinets that are quicker to hang. These panels suit studios, conference rooms, retail interiors and stage backdrops where the audience is close enough to resolve individual pixels and the room lighting is under your control.
Compare the range
Specifications below are taken from the product data for each item in this collection. Rows with fewer than two published figures are omitted. Sorted by price.
| Model | Pitch (mm) | Panel size | Brightness (nits) | Refresh (Hz) | Price (USD) |
|---|---|---|---|---|---|
| BT-P3.9DM500 | 3.9 | 500x500 mm | 1000 | 7680 | $1298.99 |
| New Flexible-Curve P2.6 Indoor 500X500 LED screen | 2.6 | 500x500 mm | — | — | $1914.99 |
| BT-P1.95DM500 | 1.95 | 500x500 mm | 1000 | 7680 | $2013.99 |
| New Flexible-Curve P1.95 Indoor 500X500 LED screen | 1.95 | 500x500 mm | — | — | $2398.99 |
| Holographic invisible screen P3.91-3.91 | 3.91 | 1200*250 | — | — | $2992.99 |
How to choose an indoor LED panel
Pitch is the whole decision indoors. Indoor audiences stand closer than outdoor ones, so the pitch that works on a festival stage will not work in a boardroom. Measure the distance to your nearest regular viewer, in metres, and treat that number as your maximum pitch in millimetres.
Do not overbuy brightness. A 4000 nit panel in a dark studio is not better, it is harder to grade and it draws more power. Indoor panels in the 800 to 1500 nit range are normal; what matters more is how the panel holds colour when driven at 20 or 30 per cent, which is where indoor content actually sits.
Specify refresh rate for camera work. Indoor panels end up on camera far more often than outdoor ones, because studios, houses of worship and conference stages all stream. If there is any chance of a camera, 3840 Hz is the floor and several panels here run higher.
Think about service access. Front-service panels can be maintained from the audience side, which matters when the wall sits against a solid surface and there is no room to get behind it. Rear-service is fine for free-standing or flown walls with clearance.
Plan the curve if you need one. Flexible-curve cabinets lock at fixed angles to build concave or convex walls and columns. If a curve is part of the design, confirm the available angles before you size the wall, because the panel count changes with the radius.
Frequently asked questions
How close can people stand to an indoor LED wall?
Roughly the pixel pitch in millimetres translates to the minimum comfortable viewing distance in metres. A 1.95 mm panel is comfortable from about 2 m, a 2.6 mm panel from about 2.6 m.
Do indoor panels work on camera?
Yes, provided the refresh rate is high enough. Specify 3840 Hz or above for broadcast and live streaming to avoid banding and scan lines.
Can indoor panels be curved?
Some cabinets in this range are built for flexible curves and lock at fixed angles. Check the individual product page, since curve capability is not universal.
Why are indoor panels less bright than outdoor ones?
They do not need to compete with daylight. Indoor panels typically run 800 to 1500 nits, which keeps power draw and heat down in a controlled room.
What is front service and why does it matter?
Front service means modules and power supplies can be reached from the audience side, which is necessary when the wall is mounted flat against a structure with no rear access.