Outdoor LED

Outdoor LED panels are built to stay readable in daylight and survive weather. That means high brightness, a sealed cabinet with a published ingress protection rating, and heavier construction than an equivalent indoor panel. These panels are used on festival stages, building facades, stadium surrounds and permanent outdoor signage where ambient light and rain are part of the job.

Compare the range

Specifications below are taken from the product data for each item in this collection. Rows with fewer than two published figures are omitted. Sorted by price.

How to choose an outdoor LED panel

Brightness is the first filter. A panel facing open sky needs to compete with daylight. Below about 4000 nits an outdoor screen washes out in sun; 5000 nits and above is normal for daylight-facing positions. A screen under a roof or facing away from the sun can run lower.

Check the ingress protection rating against the actual position. IP ratings describe dust and water resistance under defined test conditions, set out in IEC 60529. A panel on an exposed stage roof is in a different situation from one under an awning. Specify the rating for the worst weather the screen will actually see, and confirm the rating is published for that panel rather than assumed.

Accept coarser pitch outdoors. Outdoor audiences stand further back, so a 4.8 mm or 6 mm panel that would be unusable in a conference room is perfectly sharp at 10 to 20 m. Buying finer pitch than the viewing distance needs costs money and adds weight for no visible gain.

Plan for wind and weight. An outdoor wall is a sail. Weight per square metre and the wind loading of the structure are both the rigger's call, and the load figures must come from the manufacturer's load table, not from an estimate. Never size a hang from a product page alone.

Confirm the power supply. Outdoor walls draw more than indoor ones because the LEDs run harder. Multiply maximum power per square metre by the wall area for the worst case, and plan distribution and generator capacity from that number, not the average.

Frequently asked questions

How bright does an outdoor LED screen need to be?
For daylight-facing positions, 4000 nits is usually the practical minimum and 5000 nits or more is common. Screens that are shaded or face away from the sun can run lower.

What does the IP rating mean?
It is the ingress protection code defined in IEC 60529. The first digit covers solids such as dust and the second covers water. Check the rating published for the specific panel against the weather its position will actually see.

Can I use a coarser pixel pitch outdoors?
Usually yes. Outdoor viewing distances are longer, so a 4.8 mm or 6 mm panel looks sharp from 10 to 20 m while costing and weighing less than a fine-pitch equivalent.

How much power does an outdoor wall need?
Take the maximum power per square metre from the specification, multiply by the wall area, and plan distribution from that worst case rather than the average figure.

Can outdoor panels be flown?
That is a rigging decision, not a product one. Load ratings must be verified against the manufacturer's load table and signed off by a qualified rigger, taking wind loading into account.