Home / Active Speakers
Active Speakers
These loudspeakers cover the everyday work of venue sound: full-range cabinets for live music and speech, subwoofers for low-frequency extension, and column and install cabinets for fixed systems. Frequency response,...
Filters
Sort Most relevant
No products found.
Try using fewer filters, or clear all filters.
These loudspeakers cover the everyday work of venue sound: full-range cabinets for live music and speech, subwoofers for low-frequency extension, and column and install cabinets for fixed systems. Frequency response, maximum SPL and nominal impedance are the three figures to compare, because together they tell you whether a cabinet suits your room and what it needs on the amplifier side.
Compare the range
Specifications below are taken from the product data for each item in this collection. Rows with fewer than two published figures are omitted. Sorted by price.
| Model | Frequency response | Max SPL (dB) | Impedance | Power (W) | Price (USD) |
|---|---|---|---|---|---|
| MH-8 | 70Hz-18kHz (±3dB) | 110dB | 8Ω | 150 | $114.99 |
| MH-10 | 70Hz-18kHz (±3dB) | 110dB | 8Ω | 250 | $149.99 |
| MS-12 | 60Hz-19kHz (±3dB) | 112dB | 8Ω | 400 | $235.99 |
| MS-15 | 55Hz-19kHz (±3dB) | 113dB | 8Ω | 500 | $354.99 |
| MS-215 | 50Hz-19kHz (±3dB) | 119dB | 4Ω | 1000 | $473.99 |
| VS1500 | 65Hz-18kHz (±3dB) | 112dB | 8Ω | 450 | $512.99 |
| VS2500 | 60Hz-18kHz (±3dB) | 115dB | 4Ω | 1000 | $708.99 |
| HW-1801 | 35Hz-20kHz (±3dB) | 132dB | 8Ω | 800 | $748.99 |
| HW-1802 | 35Hz-20kHz (±3dB) | 135dB | 4Ω | 1600 | $1141.99 |
How to choose loudspeakers
Start from the room and the audience. Maximum SPL tells you how much level a cabinet can produce, but the useful question is how much you need at the back of your room with headroom left. A cabinet running at its limit all night sounds worse and fails sooner than one running comfortably.
Read the frequency response honestly. A cabinet specified from 60 Hz down will not reproduce kick drum or bass guitar with authority. For speech and background music that is fine; for music programme it means a subwoofer is not optional.
Check whether the cabinet is active or passive. Active cabinets contain their own amplification and need mains at the speaker position. Passive cabinets need an external amplifier matched to their power and impedance. The two plans have different cabling, different costs and different failure modes.
Use sensitivity to compare efficiency. Sensitivity in dB tells you how much output a cabinet gives for a given input power. A few dB of difference between two cabinets is a meaningful difference in how much amplifier you need.
Think about coverage, not just level. The published coverage pattern decides how wide an area one cabinet serves. Two correctly aimed cabinets usually beat one louder one placed badly.
Frequently asked questions
What is the difference between active and passive speakers?
Active cabinets have amplification built in and need mains power at the speaker. Passive cabinets need a separate amplifier matched to their power rating and impedance.
How loud is loud enough?
Compare the published maximum SPL against what your room needs at the back, and leave headroom. A system running at its limit all evening sounds worse and is more likely to fail.
Do I need a subwoofer?
If the cabinet's response stops around 60 Hz and you are reproducing music, yes. For speech and background programme a full-range cabinet is often sufficient.
What does sensitivity tell me?
How much output the cabinet produces for a given input power. Higher sensitivity means the same amplifier produces more level, which can change the amplifier you need.
Can I run two cabinets from one amplifier channel?
Only if the amplifier is rated for the resulting load. Two 8-ohm cabinets in parallel present 4 ohms, so check the amplifier's rating at that impedance.