Point source cabinets suit most rooms up to a few hundred people and deploy in minutes. A single cabinet loses about 6 dB every time distance doubles, so a 30 m room spans roughly 15 dB. Line arrays and delay cabinets both narrow that gap.
What a line array actually does
A line array is not a stack of speakers. Several elements coupled at controlled splay angles behave as one tall source, and that changes how the sound spreads vertically. A conventional cabinet spreads energy widely in both planes and loses level quickly with distance. A correctly built array constrains vertical spread, so the difference in level between the front row and the back wall is much smaller.
The key word is correctly. The benefit comes from the coupling, which means from having enough elements at the right angles. One array element on a speaker stand is an awkwardly shaped point source with none of the advantage and all of the cost.
What point source does well
A point-source cabinet is a complete system in one box. It goes on a stand or a stack, needs no prediction software to deploy sensibly, and in a normal room it covers an audience perfectly well. For the great majority of events — conferences, weddings, club shows, small festivals — this is the right answer and the array is an expensive detour.
Where the line falls
| Factor | Point source | Line array |
|---|---|---|
| Typical audience | Up to a few hundred | Several hundred upward |
| Room shape | Wide and shallow | Long and deep |
| Front-to-back level | Noticeable fall-off | More consistent |
| Deployment | Minutes, on stands | Flown, with rigging sign-off |
| Prediction software | Rarely needed | Normally required |
| Minimum sensible quantity | Two | Several per side |
The cost that is not on the invoice
An array brings flying hardware, a motor or a ground-support structure, prediction work and a rigging sign-off. Those are not optional extras, they are how the system becomes safe and how it delivers the coverage that justified it. Budget them with the cabinets.
Subwoofers either way
Array elements handle mid and high frequencies; low end comes from separate subwoofers in both approaches. Subwoofer placement — in a line, in an arc, or in cardioid arrangements — changes coverage significantly and is worth as much attention as the tops.
Rigging
Load ratings for any flown system must be verified against the manufacturer's load table and approved by a qualified rigger. A product specification is not a rigging sign-off, and outdoor positions add wind loading to the calculation.
The physics, briefly
A single loudspeaker behaves approximately as a point source, and its level falls by about 6 dB each time the distance doubles. Ten metres from the cabinet is 6 dB quieter than five metres, and twenty metres is 6 dB quieter again.
That is the problem an array addresses. In a long room, setting a comfortable level at the back means an uncomfortable level at the front. A coupled line of sources behaves differently in the near field, with level falling more slowly, which compresses the difference between the front and the back.
The effect depends on the array being long relative to the wavelengths involved and on the elements being correctly splayed. Both conditions require several elements, which is why a short array does not deliver a small version of the benefit — it mostly delivers none of it.
Worked example: a 30 m deep room
With a point-source cabinet 5 m from the front row:
- Front row at 5 m: reference level
- 10 m: about 6 dB down
- 20 m: about 12 dB down
- 30 m: about 15.5 dB down
A 15 dB spread across the audience is the difference between painful at the front and thin at the back. Either you accept it, you add delay cabinets further back, or you use an array whose vertical control reduces the spread. All three are legitimate answers, and delay cabinets are frequently the cheapest one.
Delay cabinets: the option people forget
Placing additional cabinets partway down the room, delayed so their sound arrives in time with the main system, extends coverage without the rigging and cost of an array.
The delay time comes from the distance: sound travels about 343 m/s in air, so a cabinet 20 m behind the main system needs roughly 20 / 343 = 58 milliseconds of delay, plus a few milliseconds more so the main system arrives first and the image stays at the stage.
This is often the right answer for a long, low room where flying an array is impractical anyway.
Deployment time, costed honestly
| Task | Point source | Flown array |
|---|---|---|
| Rigging preparation | None | Points, motors or towers |
| System design | Experience and ears | Prediction software |
| Physical build | Stands, minutes | Assembly and flying, hours |
| Sign-off required | No | Qualified rigger |
| Crew | One or two | Several |
For a one-day event, the labour difference alone can exceed the equipment difference. That is a real part of the comparison and it rarely appears in a specification argument.
Hybrid approaches
Many venues end up with neither extreme: a compact point-source system for the main coverage, delay cabinets for the depth, and subwoofers arranged for the room. This covers a wide range of events well, deploys quickly and costs far less than an array with the rigging that goes with it.
The honest summary is that an array is a solution to a specific problem — consistent level over long distances — and buying one without that problem buys complexity rather than quality.
Where to compare
Element and cabinet specifications are on the product pages in Line Arrays and PA Speakers. Delay cabinet processing is covered by the units in Signal Processors, and amplification in Power Amplifiers.
Checklist before choosing
- How deep is the audience area, front row to back row?
- Can the system be flown, and are there rigging points?
- Is there budget for prediction work and a rigging sign-off?
- Would delay cabinets solve the depth problem more cheaply?
- How many elements per side can you actually afford? If it is two, choose point source.
Decision criteria
- If the audience is under a few hundred in a normal room, choose point source.
- If the room is long and deep, an array keeps the back rows usable.
- If you cannot fly the system, an array loses most of its advantage.
- If you can only afford two array elements per side, buy point source instead.
- Either way, budget subwoofers separately and place them deliberately.
Compare line array elements against point source PA speakers, and see the PA system buying guide for the full chain.
Sources
- AES standards and information documents on loudspeaker directivity and array behaviour.
- The speed of sound used for delay calculations is approximately 343 m/s at 20 °C.
Frequently asked questions
Is a line array always better than point source speakers?
No. Arrays earn their complexity in long rooms and open-air spaces. In smaller rooms a point-source system is easier to deploy, cheaper and often gives a better result.
Can I use one line array element on a stand?
It will make sound, but none of the array benefit. The controlled vertical coverage comes from coupling several elements at correct splay angles.
How many array elements do I need?
It depends on room depth and the coverage required rather than a fixed number. Longer rooms need more elements so level stays even from front to back.
Do line arrays need subwoofers?
Generally yes. Array elements cover mid and high frequencies, and low-frequency output comes from dedicated subwoofers placed to suit the room.
What extra costs come with an array?
Flying hardware, motors or ground support, prediction work and a rigging sign-off. These should be budgeted alongside the cabinets, not after.